Jan 14, 2012 It didn't come with any instruction manual and the GE website is no help. Ge Smart Connection Center. I bought a house with a GE Smart Home Connection Center. CONNECTION CENTER. Product Detail. Your Whole House Is An Entertainment Center. Whether you have cable or satellite, you can enjoy your favorite TV programs and movies anywhere in your home. ConnectionCenter allows a video outlet anywhere – from the home theater in your living room to TVs in your recreation room or bedrooms. The GE Smart.
Advertising
Block Programming:
1. When programming ON/OFF events, all days are indicated by
default. To change the day selection simply keep pressing the Day
key and the display will change as follows:
key and the display will change as follows:
2. Individual Day (MON, TUE, etc.)
3. MON~FRI; SAT~SUN; MON~SAT; MON~SUN
4. MON~WED~FRI; TUE~THU~SAT
5. MON~WED; THU~SAT
6. Follow the steps above to complete programming.
3. MON~FRI; SAT~SUN; MON~SAT; MON~SUN
4. MON~WED~FRI; TUE~THU~SAT
5. MON~WED; THU~SAT
6. Follow the steps above to complete programming.
Reviewing Programs:
1. To review the programs that have been entered, press and release
the “PROG” key. Each time you do this you will be able to scroll
thru the programs.
thru the programs.
2. Any program can be edited by pressing the “HOUR”, “MIN”, and
“DAY” keys. Then press the “PROG” key in order to accept the
changes.
changes.
3. When complete press the “CLOCK” key to return to current time
![Manual Manual](/uploads/1/2/6/0/126067708/980589709.png)
and day.
Deleting Programs:
1. To delete a particular program simply press the “PROG” key until
the desired program is displayed.
2. Then press the “HOUR” and “MIN” keys until --:-- is displayed.
Then press the “PROG” key in order to delete this particular
program.
program.
3. When complete press the “CLOCK” key to return to current time
and day.
Electrical Ratings:
120VAC 60Hz
15A Resistive
15A Tungsten
1HP
15A Resistive
15A Tungsten
1HP
*When done programming,
close door.
close door.
Manual Override:
Pressing the door will override the timer setting and will manually
turn the switch ON and OFF.
turn the switch ON and OFF.
Initial Startup:
When you initially program the unit it may be necessary to press the
manual override key as the unit will not look back to determine if it
should be ON. For example if the current time is 2:00PM and you just
programmed the unit to turn ON at 1:00PM, you will need to press
the manual override key to turn it ON. Thereafter, the unit will resume
normal operation (automatic).
manual override key as the unit will not look back to determine if it
should be ON. For example if the current time is 2:00PM and you just
programmed the unit to turn ON at 1:00PM, you will need to press
the manual override key to turn it ON. Thereafter, the unit will resume
normal operation (automatic).
MEMORY BACKUP:
![Ge smart connection center manual Ge smart connection center manual](/uploads/1/2/6/0/126067708/703142529.jpg)
Ge Security Smart Connection Center
This timer is equipped with a rechargeable Ni-Mh battery which will
protect your programs during power failure for up to 30 days.
No need to replace battery.
Note that the screen blanks if the battery is discharged completely.
protect your programs during power failure for up to 30 days.
No need to replace battery.
Note that the screen blanks if the battery is discharged completely.
15086
Manual Version 2
11-24-2009
www.jascoproducts.com
Smart Digital Timer
Installation Instruction
Ge Smart Connection Center Panel
1. Turn OFF the main power.
2. Remove the existing switch.
3. Connect the wires of Timer and wall box as followed by using the wire
2. Remove the existing switch.
3. Connect the wires of Timer and wall box as followed by using the wire
nuts provided.
a) Connect the Hot/Live wire of main power to the Black wire from Timer.
b) Connect the Neutral wires in outlet box to the White wire from Timer.
Often neutral wires can be found in the back of the wiring box
a) Connect the Hot/Live wire of main power to the Black wire from Timer.
b) Connect the Neutral wires in outlet box to the White wire from Timer.
Often neutral wires can be found in the back of the wiring box
wrapped in a wire nut.
c) Connect the Hot/Live wire of Load to the Red wire from Timer.
d) Connect the Ground wire to the Green wire from Timer.
Note: Be sure that all wire nuts are secure.
c) Connect the Hot/Live wire of Load to the Red wire from Timer.
d) Connect the Ground wire to the Green wire from Timer.
Note: Be sure that all wire nuts are secure.
4. Tuck the wires into the wall box leaving room for the Timer. Using the
screws provided. Mount the timer to the wall box being careful not to
crush any wires.
crush any wires.
5. Turn Main power ON
POWER-UP SEQUENCE:
1. Lift up the bottom of the door using a small slotted screwdriver.
2. Position the slide switch to TIMER.
3. Press the “RESET” button using a paper clip.
4. The display should flash 12:00AM on Monday.
2. Position the slide switch to TIMER.
3. Press the “RESET” button using a paper clip.
4. The display should flash 12:00AM on Monday.
Ge User Manuals Online
Setting Current Time:
1. Press and HOLD the “CLOCK” key during this entire procedure.
2. Press the “HOUR” key to advance the hours.
3. Press the “MIN” key to advance the minutes.
4. Press the “DAY” key to advance the day.
5. If any keys are pressed for a prolonged period, the display will
2. Press the “HOUR” key to advance the hours.
3. Press the “MIN” key to advance the minutes.
4. Press the “DAY” key to advance the day.
5. If any keys are pressed for a prolonged period, the display will
advance rapidly.
6. Release the “CLOCK” key once the time and day have been entered. Now
the timer is in operation and ready to be programmed. The colon “:” after
the hours will continuously flash indicating that the clock is running.
the hours will continuously flash indicating that the clock is running.
Programming ON/OFF Events:
1. Press the “PROG” key once. TIMER 1 on - - : - - appears.
2. Using the “HOUR” and “MIN” keys enter the desired ON time. By default
2. Using the “HOUR” and “MIN” keys enter the desired ON time. By default
all days are indicated. See block programming below for selecting
different days. When complete press the “PROG” key once.
different days. When complete press the “PROG” key once.
3. Timer OFF --:-- will be displayed. Using the “HOUR” and “MIN” keys
Finally, 1 x NB-5L Lithium Ion rechargeable battery supplies energy up to 230 shots per charge. Talking on the lens, Canon PowerShot SD900 manual says that users will be impressed by Canon Zoom Lens 37-111mm with f/2.8-f/4.9 aperture range. Featuring well-designed user interface, 3x optical zoom lens, and 10 megapixel CCD, the Canon PowerShot SD900 sets new standard in compact digital camera industry. The SD900 will be available in 2006 at 499.99 USD only. Canon powershot sd950. Its 11 pre-programmed scene modes and exposure remains under automatic controls will be helpful for tricky subjects.If you are looking for take-anywhere camera with great versatility, make sure to include this camera into your wish list.
enter the desired OFF time. By default all days are indicated. See block
programming below for selecting different days. When complete press
the “PROG” key once.
programming below for selecting different days. When complete press
the “PROG” key once.
4. If complete press the “CLOCK” key to return to current time and day.
5. Note that a total of 7-ON and 7-OFF events can be programmed.
5. Note that a total of 7-ON and 7-OFF events can be programmed.
= Wiring Nut
Typical Wiring Schematic
Black
Black
Light
White
White
White
Red
Green
Ground
Timer
120 VAC
Power
Source
LOAD
LINE
GROUND
TIMER-GREEN
WALL-BARE
TIMER-GREEN
WALL-BARE
NEUTRAL
[WHITE]
[WHITE]
LINE
[BLACK]
[BLACK]
LOAD
TIMER-RED
WALL-BLACK
TIMER-RED
WALL-BLACK
Advertising
Popular Brands
Popular manuals